GEK Wiki / Catayltic Tar Cracking Methods
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • Get control of your email attachments. Connect all your Gmail accounts and in less than 2 minutes, Dokkio will automatically organize your file attachments. You can also connect Dokkio to Drive, Dropbox, and Slack. Sign up for free.

View
 

Catayltic Tar Cracking Methods

Page history last edited by jim mason 10 years, 10 months ago
     

 

----------------------------------------------------

 

 

A Review of the Literature on Catalytic Biomass Tar Destruction, D. Dayton.  NREL report 2002

 

 

----------------------------------------

 

 

Garret's tar cracking idea.

 

 

> On Thu, Aug 6, 2009 at 3:08 PM, garret wrote:

>         I have an interesting question for you .

>         What happens when you dry your wood (possibly like pellets)

>         then spray

>         it with starch

>         and Iron III Oxide and Possibly some Magnesium II Oxide. 5:1

>         ratio by

>         molar weight.

>

>         Then let it dry again.

>

>         Garret

>

>

On Thu, 2009-08-06 at 15:10 -0700, jim mason wrote:

> not sure.  does it make gold?  or thermite?  or a gigantic pile of

> sparklers?

>

>

>

     

 

OK well,

at about 50 to 250 ppm for Fe3o2 works a a fuel catalyst.

It's cheap enough.. bit of steel wool in a bucket of corn starch and mix

it through holds pellets and sawdust together.

25 Grams per 100 Kgs.

thats about 1 steel wood pad per 100 KG of wood.

it can be kept in catalyst form buy a magnet or coil.

currie temp is 580 C or so .. so it's just about perfect for

cracking those tough bits.

I have not tried this yet .. they use it in the FT process

to enhance the Water gas shift.

>

>

>         Garret

>

 

--------------------------------------------------------

 

david's idea

>

> Activate the SS shavings with Nitric or Phosphoric acids.  The iron is eaten

> away leaving porous nickel/chrome on the surface.  The SS mesh can be

> activated this way also.

>

> Cleaning is easy, just hit it with a blow torch till red hot.

>

> David

>

 

-

 

Comments (1)

Dave S. said

at 4:41 pm on Aug 28, 2009

Catalysis is a great way to go...It can make unsolvable problems solvable. Dolomite and lime aren't exactly expensive, either.
For catalyst cleaning, rather than using a blowtorch, why not hit it using a burner fueled with stored syngas and triggered by the GCU?

You don't have permission to comment on this page.